Seneca ST4000 storage

Seneca ST4000EX Storage Appliance

Direct Attached Expansion (DAE) exclusively for the ST4000.

product at a glance
  • Expansion for the ST4000 ONLY
  • 12G SAS Interface
  • Supports SSD, SATA and SAS
  • 2.5" and 3.5" form factors
  • Redundant hot-swap power

call seneca today

The Seneca ST4000EX is a high capacity centralized storage appliance engineered as a companion expander for the ST4000. This solution is expandable to 96 drives and features rich block level storage for iSCSI and Fibre Channel to house your surveillance recordings or archives. The ST4000EX setup and maintenance follows the simple and intuitive usage model of the ST4000 allowing you to complete your projects faster and get your customer’s system up and recording.

This simple approach to storage management combines high performance and high capacity storage hardware with next generation software to create the optimum balance of affordability, capacity and performance. The ST4000EX series delivers responsive and cost effective storage infrastructure to support multiple users, applications and servers.

Key features

  • Multiport FibreChannel
  • iSCSI
  • SAS Arrays
  • Supports the archiving features of any 3rd party VMS
  • Connect up to seven (7) ST4000EX (JBODSs) for 960TB of raw storage
  • Integrators can use the ST4000 as a standards based (iSCSI) target for xNVRs holding the primary video or 3rd party servers
  • Integrates with Seneca xConnect
  • Cables are included; two 1 meter 12G external SAS cables when connecting to a dual controller and one 1 meter 12G external SAS cable with connecting to a single controller
Seneca ST4000 Seneca ST4000 »
  • Simple setup and management for easy deployment and support
  • Optimize recording and archiving performance
  • Flexible and scalable to accommodate expansion for storage and bandwidth
  • Supports the archiving features of any 3rd party VMS

Specifications are subject to change, contact your account representative for current configuration.

Specifications
RAID
Controlled by the Seneca ST4000
Connectivity
Input: Dual Controller: 2 x SAS 12G or Single Controller: 1 x SAS 12G
Output: Dual Controller: 2 x SAS 12G or Single Controller: 1 x SAS 12G
Storage Expandability
Up to 7 x ST4000EX Expansion Chassis; maximum 96 drives
Compliance
Safety: UL 60950-1, EN 60950-1, IEC60950-1
EMC: CFR 47 Part 15, subpart B, Class A: CES/NMB-003 Class A, ENC55022 Class A, EN55024, EN61000-3-2, EN61000-3-3
Operating System: VMware ESXi v5.x & v6.x
Standard Marks/Approvals
North America: FCC, UL, cUL, ICES/NMB-003 Class A Europe: CE China: CCC (PSU only) Taiwan: BSMI Korea: MSIP (formerly KCC) Japan: VCCI Australia: RCM (formerly C-tick)
Environmental Standards
Registered through DEKRA to the international environmental management systems standard ISO 14001:2004 and holds certificates for its manufacturing sites at Havant, UK; Guadalajara, Mexico and Seremban, Malaysia
Warranty
Three Year 24/7 Phone Support with NBD Part Replacement
Options:
Base Warranty with NBD Onsite Service and Parts
Base Warranty with 8/5 Four Hour Onsite Response*
Base Warranty with 24/7 Four Hour Onsite Response*
Five Year Warranty Upgrade Available
Cabling
2 x 1 meter 12G external SAS cables for a dual controller
1 x 1 meter 12G external SAS cable for a single controller
Form Factor
2U Rackmount
Power Supply
475 Watts; Dual Load Sharing Hot-swap with Integrated Chassis Cooling Fans
BTU/hr
1,622
AC Input / VAC Frequency
100–200VAC / 50–60 Hz
Power Draw
3.95 Amps at 120VAC / 2.16 Amps at 220VAC
Cooling
Active
Bays
12 x 3.5" or 2.5" Hot-swap
Maximum Storage
120TB of RAW storage per enclosure
960TB of RAW storage with 7 x ST4000EX Expansion Chassis (including the Seneca ST4000)
Front I/O
Power Switch, Disk Activity, host Port Activity
Ambient Operating Temperature
5°C to 40°C (41°F to 104°F)
Operating Humidity
10% to 90% RH up to 40°C (104°F) Non-condensing
Mounting
Standard ISO Rack
Dimensions (w x h x d)
17.6 x 3.5 x 20.5 inches / 447 x 89 x 527 millimeters
Weight
46.2 lbs / 20.8 kg with slides
68.4 lbs / 30.5 kg with slides and fully populated disk load

*Four hour Onsite response subject to location
Specifications are subject to change, contact your account representative for current configuration.

Resources
Images
ST4000EX 2U 12 Bay Rackmount

Seneca ST4000EX 2U 12 Bay Rackmount front - no bezel

Front - No Bezel