xVault ST3000 storage

xVault ST3000 Network Storage Appliance

Flexible and scalable.

product at a glance
  • Simple setup and management makes the ST3000 easy to deploy and support
  • Optimize recording and archiving performance
  • Flexible and scalable to accommodate expansion for storage and bandwidth

The product is obsolete please check the Storage page for the current listing.

call seneca today

Easy to Use Expandable Storage Appliance for Video Surveillance

The xVault ST3000 is a centralized storage solution intended for multiple surveillance server deployments. The ST3000 can be used as primary recording storage or as an archiving location Simple management makes the ST3000 easy to deploy and maintain, and the flexibility to add JBODs means you can expand the storage footprint to meet gcontainering camera or archiving needs.

Key features

  • Compared to other storage solutions setup and maintenance is simpler and more intuitive, allowing you to complete your projects faster and spend less on support time
  • Ability to add ST3000EX JBODs means you can easily add large amounts of storage expansion to support camera recording
  • The ST3000 provides multiple networks ports increasing bandwidth and allowing for support of multiple xNVRs

Archiving Options

  • The ST3000 can support the archiving features of any 3rd party VMS
  • Integrators can use the ST3000 as a standards based (isci) target for xNVRs holding the primary video or 3rd party servers
  • For additional storage up to four (4) ST3000EX (JBODSs) can be attached for 576TB of raw storage

Specifications are subject to change, contact your account representative for current configuration.

explore our xnvr products
Operating System
Client Operating System
Windows Server 2012/2008, Windows 10, 8/7 VMware*, Citrix, Linux, Solaris
Network Protocols
FCoE, iPv4, iSCSI, SMB, SMB2, CIFS, NFS v 2 / v3
iSCSI Volume Security
CHAP, Mapping/Masking+
SAS v2 6
Yes (configurable for expansion or host connection with or without mapping and masking)
Fibre Channel
Optional 8Gb/s and 16 Gb/s¹ (supports masking)
Landscape and Portrait Capable
iSCSI, SAS, and Fibre Channel
Local Replication
Maximum iSCSI Sessions
Maximum Mounted Volumes
Volume RAID Set Crossover
Local & Remote Replication
Block Level Deduplication
Block Level Deduplication
Drive Level Encryption
Thin Provisioning
Backup to Cloud
Form Factor
Network Interface
Five 1Gbe Ports
SAS 6g
3 x External Mini-SAS, 4 x SFF-8088 Connector
Optional 10Gbe Support¹
Dual SFP+, Dual RJ45 Cat6a
Optional F/C Host Ports¹
1GbE or 10GbE PHY
Optional Infiniband Host Ports¹
Dual QDR or FDR external connections
Maximum Internal Drives
24 x 2.5" or 3.5"
External Expandable
Up to 216 drives; 584 with 6 SAS port option
Drive Compatibility
SAS 3g, SAS 6g, SATA-I, SATA-II, and SATA-III (6g)
RAID Level Support
0, 1, 10, 5, 6, JBOD, RAID 50 and 60 by volumes spanning RAID sets
Total Expanded Raw Capacity
Dimensions (w x h x d)
19 x 7 x 26.7 inches / 483 x 174 x 679 millimeters
35kg / 77 lbs. with PS & Rails (53.5kg / 118 lbs with drives)
Dual Load Balance Hot Swap, Redundant 975 watts, 80+ efficiency rating
AC Input / VAC Frequency
100VAC - 240VAC / 47-63 Hz
BTU per Hour
Operating / Non-Operating Temp
0°C to 40°C / 0°C to 50°C
Operating / Non-Operating Humidity
5%–90% non-condensing

1 Only one option slot for 10Gbe, additional SAS ports, F/C, or Infiniband
* Not on HCL
Specifications are subject to change, contact your account representative for current configuration.

ST3000EX 4U 24 Bay Rackmount

ST3000EX 4U 24 Bay Rackmount front no bezel

Front - No Bezel

ST3000EX 4U 24 Bay Rackmount front left

Front Left

ST3000EX 4U 24 Bay Rackmount front left no bezel

Front Left - No Bezel